Heavy Duty Qd TypeDouble Beam Overhead Crane
QD bridge foundry crane with hook is mainly used at the place where the molten metal is lifted. The working class of the complete machine is FEM 4M, and the thermal-protective coating is added at the bottom of the main girder. The assembling and test of the crane conform to the document No. ZJBT375 WHICH WAS ISSUED BY General Administration of Quality Supervision, Inspection and Quarantine of China. The place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document.
QD type double hook moverhead crane is main handling equipment for smelting workshop of steel works . The two hooks are cooperated with each other to finish the work of converying, pouring and hot metal charging of liquid metals in smelting proess. Due to the work situation is very tough, high efficiency and high security are required.
1. Overload protection: If the materials or electric current overstep the capacity, the QD type double beam overhead crane will give a sharp warning for protection itself.
2. Emergency brake: If there's emergency situation, it could stop the double beam overhead crane to protect operator and goods.
3. Control Method: Room control or remote control to avoid any injure to the operation staff for double beam overhead crane.
4. Main lifting motor: with thermal protection and currency protection.
5. Hooks with latch:to prevent goods fall down;
6. Rubber buffers
Operation model: Round handle; remote control; cabin (open and closed)
Load handling device: The double beam overhead crane can also be furnished with motor grab, electromagnetic chuck according to the requirements of varied types of materials.
Motor: The QD type double beam overhead crane travelling motor can be soft start motor and frequency adjustable-speed motor to start steadily and run safely.
QDY Steel Making Industry High Temperature Double Girder Ladle Hook Overhead Crane is mainly used at the place where the molten metal is lifted. The working class of the complete machine is FEM 4M, and the thermal-protective coating is added at the bottom of the main girder. The assembling and test of the crane conform to the document No. ZJBT375 WHICH WAS ISSUED BY General Administration of Quality Supervision, Inspection and Quarantine of China. The place where molten nonmetal material and red-hot solid metal is lifted also can refer to this document.
Mainly consists of bridge, trolley, hook beam, crane travelling and electric part, etc.;
Adopt double-girder structure below 125t and four-girder structure above 125t;
The main grabbing device of main hook is fixed-spacing hook girder used to lift foundry ladle;
Auxiliary hook is used to work with main hook to dump the molten iron and do other subsidiary lifting operation;
Main hoisting and transportation equipment in steel mill and smelter workshop;
Used for transshipment and pouring of liquid metal during melting, etc;
Add thermal-protective coating under the main girder;
Ambient temperature: below +60°C, moisture: less than 50%;
Crane assembly and test accord with No. 375, 2007 document issued by AQSIQ.
As this kind of crane is customized, in order to offer you most suitable design and best solution, please confirm following information when you send inquiry.
1. lifting capacity.
2. span length.(rail center to rail center)
3. lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us supply the rails? How long is it?
5. Power supply: Voltage.Hz.Phase.
6. Working condition: which material to lift? temprature?
7. Would be better if you have drawings of your plant.
QDY Overhead Crane with Hook Foundry 10t
Span S(m) 10.5 13.5 16.5 19.5 22.5 25.5 28.5 31.5
Lifting height m 20 20 20 20 20 20 20 20
Lifting speed m/min 13 13 13 13 13 13 13 13
Trolley speed m/min 44.9 44.9 44.9 44.9 44.9 44.9 44.9 44.9
Crane speed m/min 118.6 118.6 118.6 119.3 119.3 114.9 114.9 114.9
Lifting motor kw 26 26 26 26 26 26 26 26
Trolley motor kw 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2
Total weight kg 17480 19680 22200 25800 28570 33750 37910 41780
Max Wheel Load KN 112 120 130 138 145 160 171 180
P43 P43 P43 P43 P43 P43 P43 P43
Main dimension mm 10.5 13.5 16.5 19.5 22.5 25.5 28.5 31.5
Rail top to main top H1 1876 1876 1876 1876 1876 1926 1926 1926
Rail top to hook centre H2 602 602 602 602 602 552 552 552
Wheel base W 4050 4050 4050 4050 4050 5000 5000 5000
Crane width B 5800 5800 5800 5940 5940 6380 6380 6380
Hook left limitation S1 1600 1600 1600 1600 1600 1600 1600 1600
Hook right limitation S2 1300 1300 1300 1300 1300 1300 1300 1300
Trolley gauge K 2000 2000 2000 2000 2000 2000 2000 2000
1. Our History:
LITE Crane Co., LTD has focused on top quality Crane Parts for over 14 years in China. We started as a small operation, but now have become one of the leading suppliers in the crane industry in China.
Today, LITE Crane Co., LTD has been one of the top producers of quality crane and crane parts, such as: Electric Hoist, single, double girder bridge, gantry, grab, casting, explosion-proof crane series and accessories.
2. Our Factory:
LITE Crane Co., LTD is located in Xinxiang, Henan Province China. The company covers an area of 680 thousand square meters and owns more than 2700 employees. The annual sales of LITE Crane Co., LTD is 1.6 billion USD, there are more than 600 sales agencies at home and abroad and more than 180 middle& senior engineering and technical personnel who are in charge of design and development of all products and also own the development center of their new technology and products.
Our Products includes the following:
1, Crane accessories
2, Electric hoist
3, Single - beam cranes
4, Double - beam cranes
5, Bridge Crane
6, Gantry Crane
7.Lifting equipment and accessories
We supply crane products all over the globe to a wide range of companies worldwide.
The products are widely used in the following industry, such as power plants, nuclear power, water conservancy, tunnels, bridges, petrochemical, metallurgy, construction, open-air warehouse, wharf, workshop ...
Our company is a member of China Crane Association and vice chairman company of China Heavy Machinery Association. It owns the production licenses of electric hoist, single & double-girder crane, the safety of the approval certificate of manufacturing, installation and maintenance, the safety approval certificate of the manufacturing of 320T bridge crane, portal crane and 280Tcasting crane.
The company has passed the quality system certification of GB/T19001 -2008/IS09001:2008, the environmental management system certification of GB/T24001-2004/ISO14001:2004 and the occupational health and safety management system certification GB/T28001-2001.
There are 1600 units of all kinds of processing equipment which can independently accomplish all the processes such as milling, digging, grinding, pulling, boring, rolling, drilling, punching, cutting, bending, welding, testing and heat treatment.
Our products are sold to more than 30 provinces, municipalities and autonomous regions in China, and also exported to Australia, Vietnam, India, Thailand and some Southeast Asian countries. The annual sales of double-girder and portal cranes is more than 3600 units, more than 23000 units single-girder cranes, about 23000 units single-girder & double-girder electric hoist and accessories. The production and sales of the single-girder cranes has lead the nation for seven consecutive years and the per capita output and economic benefits are among the best in the same industry.
Besides our existing molded products, LITECrane Co., LTD also can produce products according to the drawings or samples from our customers. We control the product quality critically for every step during the manufacturing from custom.
Looking for ideal Qd Type Bridge Crane Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Qd Type Overhead Bridge Crane
are quality guaranteed. We are China Origin Factory of Qd Type Double Girder Overhead Crane
. If you have any question, please feel free to contact us.
Product Categories : Overhead Crane > Double Girder Overhead Crane